Uni-Hydro 45-14 Ironworker (1 or 3 ph)

Uni-Hydro 45-14 Ironworker (1 or 3 ph)

  • $6,110.00
  • Save $390


Made in USA

  • Two types of Angle Shear - Slug type (removes slug on each cut, w/mitering possible) and Sever type (cuts w/o removing slug to eliminate material loss, both are optional)
  • Miter Angle 45 deg. - 3x3x3/8" bar shear, 2x2x5/16" slug-type
  • Channel Shear - 1 and 2" combined or 3" standard
  • Rod Shear - 3/4" round or square
  • Coper Notcher - for 3 x 3" x 1/4" angle
  • Square Notcher - 1-3/4 x 2 x 1/4"
  • Pipe Notcher (Sced. 40 or 80) - 1/2, 3/4, 1, 1-1/4, 1-1/2"
  • Brake - 6 or 9" x 1/4"
  • Strokes per Minute - 50 (light material), 7 (at max. cap.)
  • Hydraulics - 1000 psi
  • Oil Capacity - 15 quarts
  • Approx. dimensions - 28W x 34L x 60"H

Manual punch aligner

6" open throat punch has 45-ton capacity

14" bar shear with 4-sided blades

Bar shear hold-down can be fixed or adjustable

Variable stroke control

Built for forklift handling

Magnetic starter for safety and reliability

OPTIONAL Tooling for Punch Station

Square Notcher

Coper Notcher

Pipe Notcher

6” Brake

OPTIONAL Tooling for Power Cavity

Square Notcher

Coper Notcher

Angle Shear

Z & T Shear

Channel Shear

Brake: 6 or 9”

Rod Shear (Round or Square)

Standard Accessories:

  • 6" Throat Depth
  • Open throat punch
  • Manual punch aligner
  • Variable stroke control
  • Full up and down stroke control
  • Built for forklift handling
  • Magnetic starter for safety and reliability

Specifications:

45-14

Tonnage

45

Angle shear 90 deg

Slug, 3x3x3/8"

Angle shear 45 deg

Sever, 3x3x1/4"

Bar shear

3/8x14,1/2x10"

Bar shear

5/8x6"

Punch

1.06" in 1/2"

Punch

1.375" in 3/8"

Throat

6"

Motor HP

3, 1 or 3 ph

Net weight (lbs)

1240